Description
This is the Orion-Tr Smart 12/12-30A (360W) Isolated DC-DC Charger By Victron Energy. This is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth that is popular for vans, RVs, and boats where the alternator and the start battery are used to charge the house battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch.
The Orion-Tr Smart charger is suitable for both lead acid and lithium batteries. Unlimited units can be connected in parallel to increase output power.
Suitable for high temperatures up to 55°C with a full rated output up to 40°C.Â
Orion-Tr Smart 12/12-30A Features:
Bluetooth Smart enabled
Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
Fully programmable
• Battery charge algorithm (configurable) or fixed output.
• Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage chargealgorithm: bulk –absorption –float
• For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.
• For lithium batteries absorption time is fixed, default 2 hours.
• Alternatively, a fixed output voltage can be chosen.
Remote on-off
A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.
High temperature protected
The output current will reduce at high ambient temperature.
IP43 protection When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
.
Orion-Tr Smart 12/12-30A Specifications in Brief
Input voltage range : 10-17V
Under voltage shut down : 7V
Under voltage restart : 7.5V
Nominal output voltage : 12.2V
Output voltage adjust range : 10-15V
Output voltage tolerance : +/-0,2V
Output noise : 2mV rms
Cont. output current at nominal output voltage and 40°C : 30A
Efficiency : 87%
Off load current : < 80mA
Weight : 1.8 kg (3 lb)
Dimensions : 130 x 186 x 80 mm (5.1 x 7.3 x 3.2 inch)
Download the complete spec sheet
Download the User Manual
Download the Victron Connect Manual
Engine-On Detection Set-Up
Reviews
There are no reviews yet.