1332-BK : Anderson Powerpole PP15 Terminals : 15A, 16-20Ga

What's Included?
The metal terminal contact pins featured on this page crimp onto #12 or #14 gauge wire. Sold in bagged quantities of 20. Does not include colored plastic housings (sold separately).

15, 30 & 45 amp Powerpole connectors will mate with each other
The 15, 30 & 45 amp contacts all use the same 1327 series plastic housings. Therefore, they will all connect to each other. The difference between the 15, 30 & 45 amp contacts is the size of the receiving barrel that accepts the various wire sizes.

• 15 amp contacts are recommended for 20-16 gauge wire
• 30 amp contacts are recommended for 14-12 gauge wire
• 45 amp contacts are recommended for 10 gauge wire

High current rating, low resistance
The size of the flat contact area is actually the same for all 15, 30 & 45 amp contacts. Powerpole connectors will safely handle higher loads or surges, please read the data sheet for additional information.

The contacts are made of highly conductive tin-plated copper for minimal contact resistance at high currents. The average contact resistance is 600 micro-ohms.

Flat wiping contact system
This system allows for minimal contact resistance at high current. The self-wiping action cleans contact surfaces during connection/disconnection. The contacts are rated at 10,000 no-load connect/disconnect cycles.

Stainless steel spring
Powerpole connectors use a stainless-steel spring which applies 25 lbs. of pressure to hold the tin-plated copper contacts firmly together and maintain constant contact. Other cheaper connectors simply depend upon soft copper that eventually spreads apart and becomes loose.