Description

The BlueSolar 10A PWM solar charge controller with LCD & USB by Victron Energy.  Great features in a cost-effective controller.

• Lighting control function, fully programmable
• Three stage battery charging (bulk, absorption, float), fully programmable
• Load output with low voltage and manual disconnect (programmable)
• Load output protected against over load and short circuit
• Protected against reverse polarity connection of the solar panels and/or battery

.

BlueSolar 10A PWM Solar Controller Features

• Liquid crystal display
  For tracking and configuration.
• Load output
  Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage.Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual.The connect and disconnect voltages are adjustable.
• Day/night timing of the load output
  This option allows for a pre-set ON-time after dusk.
• Programmable battery charge algorithm
  Preprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only)
• Two 5 Volt USB outputs
  Maximum current (both outputs combined): 2A

.

Download the Spec Sheet