Description

The Conext™ Auto Generator Start (AGS) can automatically activate or stop a generator in response to changing power requirements. Excellent addition to an off-grid or backup power system, the AGS seamlessly connects to the Xanbus network and shares status information with all other devices on the network. It can monitor a set of system user-programmable parameters such as battery voltage, state of charge or grid power and can activate the generator in response to any changes. The Conext™ AGS can also be configured remotely using the Insight energy management system to engage a generator and can assist an inverter/charger when output power demands are high.

Why Choose Conext Auto Generator Start?

Higher Return on Investment
Integrate with an inverter/charger to maximize system power performance

Designed for Reliability
Tested and qualified for harsh environmental conditions (HALT reliability testing)

Flexible

• Works with multiple Xanbus devices such as XW Pro, SW, MPPT 60-150, MPPT 80-600, MPPT 100-600, SCP, Insight
• User-programmable trigger settings to meet specific application needs such as battery voltage, exercise time, inverter AC power loads, SOC, and quiet time
• Supports manual start and stop operation modes

Easy to Service

• Access and troubleshoot AGS device events using the Insight or SCP
• Easily upgrade new firmware to the AGS using Insight

Easy to Install

• Wall mount
• RJ45 connections for Xanbus network cables

.

Conext Auto Generator Start Specifications

Electrical Specifications
Nominal input network voltage : 15 Vdc
Max. operating current : 200 mA @ nominal input network voltage
Relay contact voltage rating : 12 Vdc, 30 Vdc max
Max. relay contact current : 5A DC

General specifications
Dimensions (H x W x D) : 9.55 x 14.6 x 3.7 cm (3.8 x 5.7 x 1.5 in)
Weight : 225.0 g (0.5 lb)
Mounting options : Wall-mount
IP rating/location : IP20, indoor only
Part number : 865-1060-01
Warranty : 2 Years