Description
Need to mount your solar to common corrugated metal roofing? The CorruBracket 100T Metal Roof Attachment by S-5! is your solution. The CorruBracket™ 100T is designed specifically for corrugated roofing profiles that are common in North America, and is affixed to the crest of the corrugation, leaving the drainage plane free of holes to protect against leaks.
Standard or Mini sizes are available.
For medium‑duty applications, the bracket can be attached directly to the sheeting or strapping under the roofing, accommodating ancillary attachment anywhere along the corrugation.
For heavy‑duty applications, the bracket can be fixed into the underlying substrate for additional support without crushing the corrugation. Select screws accordingly.
No Additional Sealants Required
Having no messy sealants to apply, CorruBracket 100T comes with a factory‑applied EPDM rubber gasket seal already on the base, and the S‑5!®‑patented reservoir conceals the EPDM from UV exposure, preventing UV degradation.
Use roofing screws with EPDM rubber washer, or S5 Screws, to further seal your work
Installation is simple!
CorruBracket 100T is mounted directly into the crest of the corrugation, straddling the valley. No surface preparation is necessary; simply wipe away excess oil and debris, align, and apply. Secure directly into the crest of the corrugation by driving the appropriate screws into the pre‑punched holes, or pre‑drilling the proper‑sized hole through the pre‑punched holes and riveting.
The slotted top hole, which accommodates standard M8 nuts and bolts, simplifies alignment and maximizes flexibility in attaching ancillaries.
CorruBracket™ 100T Mini
The CorruBracket™ 100T Mini is a bit shorter than its standard counterpart and has two pre‑punched holes in its base rather than four.
The mini is the choice for attaching all kinds of rooftop accessories: signs, walkways, satellite dishes, antennas, rooftop lighting, lightning protection systems, solar arrays, exhaust stack bracing, conduit, condensate lines, mechanical equipment—just about anything!*
*S-5! mini brackets are not compatible with, and should not be used with, S-5! SnoRail™/SnoFence™, or ColorGard®, or X-Gard™ snow retention systems.
What’s Included
The CorruBracket™ 100T and CorruBracket™ 100T Mini each come with factory‑applied EPDM rubber gaskets on the base. As a structural aluminum attachment bracket, the CorruBracket 100T is compatible with most common metal roofing materials.
Attachment fasteners not included as these are site and roof dependent.
Reviews
There are no reviews yet.