Yeti MPPT Charge Optimization Module by Goal Zero 14004

CAD $134.00

The Goal Zero 14004: Yeti MPPT Charge Optimization Module makes your solar panels charge your Yeti faster, and lets you connect more solar modules to your Yeti 1000 or Yeti 1400 power pack. This MPPT module is pre-installed in the Yeti 3000.

Out of stock

SKU: GZ14004 Categories: , , Tags: , , , , , , , , , , , , , , , , , ,
   

Description

The Goal Zero 14004: Yeti MPPT Charge Optimization Module makes your solar panels charge your Yeti faster, and lets you connect more solar modules to your Yeti 1000 or Yeti 1400 power pack. This MPPT module is pre-installed in the Yeti 3000.

The Goal Zero 14004 Solar Charging Optimization Module is an external maximum power point tracker (MPPT) and when installed properly, actively monitors and optimizes the energy source to maximize power input, resulting in up to 40% faster charge times, especially from solar panels.

What is MPPT?

MPPT stands for Maximum Power Point Tracker. The Solar Charging Optimization Module is an external MPPT and when installed properly, actively monitors the energy source you’re using to charge the Goal Zero Yeti Lithium and optimizes the source to maximize power, resulting in up to 40% faster charge times, especially from solar panels. You may also notice better charge times from AC when utilizing the Yeti Lithium’s AC charging cable plugged into the module.

How many solar panels can I plug into the module?
There are three inputs on the module that can be used at the same time; however, do not exceed more than 22V under standard use (ie standard 36-cell solar modules), as this can result in damage to the Yeti Lithium and potential bodily injury. We recommend chaining solar panels in parallel (positive to positive, negative to negative, etc). We’ve taken the guesswork out of chaining when using Goal Zero Boulder Solar Panels, the 8mm blue-ringed connector and combiner cables properly chain our panels together for approved use with the Yeti Portable Power Stations. Please call our solar experts at 888-794-6250.

Can I plug solar panels into the module and the Goal Zero Lithium input ports at the same time?
Yes; however, we recommend using the module’s inputs for solar panels since it can optimize the charging efficiency up to 40%. You may even notice up to 20% more efficiency when charging the Yeti Lithium from the wall when using the module.

Can I use non-Goal Zero Solar Panels or a custom wiring solution or any solar configuration that may be over 22V open circuit voltage?
Please call our solar experts.

Goal Zero 14004 Optimization Module Tech Specs

• Charges the following:

Goal Zero Yeti 1000 @ Max input: 3.5 hours
Goal Zero Yeti 1400 @ Max input: 5 hours
Goal Zero Yeti 3000 @ Max input (included with Yeti 3000): 10 hours

• Ports (do not exceed 22V input under standard use):

8mm charging port (input): 15-22V. Do not exceed 150W (10A) per port.
Power pole charging (input): 15-22V (max 350W)
Expansion Module Connector (output): 25A MPPT charge controller

• Weight: 1.3lbs (583g)
• Dimensions: 10.25 x 3.3 x 1.5 inches

Reviews

There are no reviews yet.

Be the first to review “Yeti MPPT Charge Optimization Module by Goal Zero 14004”

Your email address will not be published. Required fields are marked *