Description
This is the GSCM-MINI-I. An auto generator start AGS module by Atkinson Electronics. This is a microprocessor-based generator-starting controller that receives start commands from any 12 VDC output or dry-contact switch, including an inverter or charge controller’s auxiliary relay, a voltage-controlled relay, a timer, a water-tank float switch, or any user-supplied contact closure. It automatically controls a gas/propane powered generator or pump, and is sealed for harsh-environment operation.
The GSCM provides contact signal relays to start the engine and to disconnect the starter when a minimum generator frequency output is measured. It can monitor the generator operation, shutting it down and displaying the fault conditions detected. The GSCM must be manually reset after a generator fault.
The GSCM is powered by 12 to 24 VDC from a battery bank and will start generators for 12 to 48 VDC systems. For 48 VDC systems the GSCM must be powered by a 24 VDC-or-less tap on the 48 VDC battery bank, or from the generator’s starting battery. The GSCM provides a 30-day exercise function that can be synchronized with a photovoltaic input to only start each 30-day period at the beginning of the solar charge day. It also has a timed relay that can be used for diesel engine glow plugs. 2-year limited warranty. Dimensions are 5.5″H x 3.3″W x 1.5″D.
GSCM-MINI-I
The GSCM-MINI-I generator start controllers are optimized for use with OutBack Power and other inverters and charge controllers that have a 12 VDC output from their programmable AUX relay. They support three types of three-wire generator control: momentary, maintained, or ignition. They have a fixed crank time and over and under frequency shutdown.
Read/Download The User Manual Here
2-year limited warranty.
Reviews
There are no reviews yet.