SAE to Ring Terminals – 15 inch : 18 AWG zip cord cable, #10 rings
SAE to Ring Terminals – 18 inch : 16 AWG zip cord cable, 5/16” rings, shrouded SAE & cap
SAE to FCLA : SAE to Female Cigarette Lighter Adapter (socket)
SAE to MCLA : SAE to Male Cigarette Lighter Adapter
SAE to 2.5mm Barrel : SAE to 2.5mm id x 5.5mm od Barrel Adapter
SAE to 2.1mm Barrel : SAE to 2.1mm id x 5.5mm od Barrel Adapter
SAE Y-cable : Output Splitter/Combiner Cable
8′ Extension : SAE to SAE 8′ Extension cable, 18AWG
20′ Extension : SAE to SAE 20′ Extension cable, 14AWG
7A Charge Controller : Charge control for 12V lead acid batteries

Need Battery Storage?

There are 3 battery systems we can recommend for use with the P3 125W solar panel…
(We also recommend one of the P3 extension cables (listed above), so you can deploy the solar panel at an effective location vs the battery kit)

Connecting to the P3 Dynamo AC 600…
The first is the P3 Dynamo AC 600 Lithium kit. Affordable, rugged, and built with premium components and the P3 solar panels in mind, so this is plug & play with P3 cable accessories.

Or, consider the popular Goal Zero Yeti 1250 or Yeti 1400 Lithium.
Connecting to the Yeti 1250…
Via the Yeti 8mm input port, you will need the following connectors: P3 SAE to 2.5mm Barrel, and the Voltaic K-Tip (2.5mm>7.9mm). This port accepts 160W max.
Via the Yeti’s Anderson Power Port input port, you will need the following connectors: P3 SAE to Ring Terminals, MC4 connector set, Goal Zero MC4 to Anderson cable.
Cut the O-rings off the P3 cable and crimp-on the MC4 connectors (IMPORTANT-POLARITY MUST BE PRESERVED!).

Connecting to the Yeti 1400 Lithium…
The Yeti 1400 Lithium has a lower input voltage range, and although it can handle larger input wattage solar panels, the voltage needs to be managed.
Use the 7A Charge Controller for a simple solution.
Use the following MPPT charge controller for best results: Morningstar Sunsaver 15L

Let us know if you have any questions about configuring your P3 solution.