QMUTM : QBase Universal Tile Mount Kit by Quick Mount PV

CAD $61.99

The QMUTM-A-12 QBase Universal Tile Mount uses the QBase foundation and two spun aluminum cone flashings for installing solar panels on tile roofs with superior strength and waterproofing. The installer can conform the secondary top flashing to fit virtually any roof tile, flat or curved. Part# : QMUTM-A-12
EOL Notice

147 in stock

SKU: QMUTM-A-12-UNIV-TILE Categories: , , , , , , Tags: , , , , , , , , , ,
   

Description

The QMUTM QBase Universal Tile Mount uses the QBase foundation and two spun aluminum cone flashings for installing solar panels on tile roofs with superior strength and waterproofing. The installer can conform the secondary top flashing to fit virtually any roof tile, flat or curved.
From QuickMount PV & Ironridge,

EOL Notice : This product is being replaced by the model QMNS

The primary flashing at the roof deck forms a waterproof shield isolating all penetrating fasteners from water intrusion. The top flashing is malleable, so it works equally well for curved and flat tile roofs. Both flashings feature a spun aluminum cone, with no seams to fail in extreme climates. The reinforced QBase® makes an extraordinarily strong foundation. Ideal for both retrofit and new roof solar panel installations.

Part# : QMUTM-A-12

QMUTM-A-12 QBase Universal Tile Mount Features
  • Flashed at both the deck and top levels
  • 18×18-inch malleable top flashing with spun aluminum cone
  • 9×9-inch subflashing with spun aluminum cone
  • QBase® is the strongest off-the-shelf mechanical mount
  • 3031 lbs. average ultimate pullout (Douglas fir)
  • 803 lbs. average ultimate shear
  • All exposed hardware is 18-8 stainless steel
  • Attaches to roof structure with 2 or 4 fasteners
  • Meets or exceeds tile roofing best practices
  • 100% IBC compliant
  • All fasteners and hardware included
  • 25-year warranty
  • Works with all leading racks

.

QBase Universal Tile Mount Downloads

.

QMUTM-A-12 QBase Specifications

Included in kit
Cast aluminum QBase
Aluminum post, 1-1/4” x 6-1/2”9” x 9”
Spun aluminum cone subflashing
18” x 18” spun aluminum cone malleable flashing.
Two zinc-coated steel lag bolts, 5/16” x 3”
Stainless steel machine bolt
5/16″ x 1″EPDM post collar/counter flash
EPDM-bonded stainless steel sealing washer, 5/16” x 1-1/4”Stainless steel fender washerStainless steel split lock washer, 5/16”Grade-8 machine bolt, 5/16” x 3/4”

Pullout/shear
3031 lbs. average ultimate pullout (Douglas fir);
803 lbs. average ultimate shear

Tools needed for installation
Tape measure Drill with 7/32″ wood bit
Ratchet with 1/2″ socket
Caulking gun
One tube of sealant compatible with roofing materials
30 lb felt paper Whisk broom or vacuum Roofer’s bar or shingle ripper

Applicable roof types : All tile roofs, curved or flat
Flashing size : 18″ x 18″ top flashing; 9″ x 9″ subflashing

Additional information

Weight .3 kg
Dimensions 47 × 47 × 2 cm

Reviews

There are no reviews yet.

Be the first to review “QMUTM : QBase Universal Tile Mount Kit by Quick Mount PV”

Your email address will not be published. Required fields are marked *