Description
The SAM-1500C-12 is a robust all-in-one unit perfect for small RV’s, tiny houses, & cabins. It integrates a 1500W Modified Sine Wave Inverter, 30A Transfer Switch and a Two Stage 12V, 15 Amp Battery Charger. The transfer switch automatically detects utility or generator power and seamlessly transitions to/from your battery bank. You also get safe and rapid charging of 12V battery bank when grid power is available.
SAM-1500C-12 Key Features…
- Integrated 1500W Modified Sine Wave Inverter, 30A Transfer switch, and 2 Stage 12 VDC, 15A Battery Charger
- High efficiency, lightweight, and compact for easy installation
- Separate ON/OFF control for Inverter and Battery Charger for selectable operation as inverter, charger or UPS function
- 4 color LED indicators to monitor operational status
- Load controlled fan for efficient cooling when required
- Allows use of higher capacity external 12V battery bank for longer backup time
- Neutral to Ground Bond Switching Relay for grounding compliance
- Electronic protections including GFCI when in Inverter Mode
- Ideal for RV’s, Trucks and remote housing
Ideal For…
- Uninterrupted AC backup power during residential power outages
- 12V Battery charging
- RV’s, trucks and remote housing
SAM-1500C-12 Documentation…
Download The Manual
Download The Spec Sheet
SAM-1500C-12 Specifications…
- Model No. SAM-1500C-12
- Output – Inverter Mode
- Continuous active output power : 1500W (Power Factor = 1)
- Maximum surge power : 3000W (<1 sec; Power Factor = 1)
- Nominal output voltage : 115 VAC, +10% / -5%
- Frequency : 60 Hz ± 5%
- Peak Efficiency : 90% (@ 50% load)
- Inverter on/off control : By front panel Switch
- Output – Grid Pass-Through
- Nominal voltage, frequency of grid : 120 VAC, 60 Hz
- MAXIMUM POWER : 1500W (Power Factor = 1; Battery fully charged)
- Input – Battery
- Battery System Voltage : 12V (10.5V to 15.5V ± 0.5V)
- dc current draw from battery at rated output power : 150A
- dc no load current draw in inverter mode : 0.65A to 0.85A
- Input – Grid
- Nominal voltage, frequency 120 VAC, 60 Hz
- Maximum ac input current – GRID pass through 15A (Protected by 15A breaker)
- Transfer Specifications
- Current rating of transfer relay : 30A
- Transfer time from grid to inverter : 2 to 3 seconds
- Transfer time from inverter to grid : Up to 1 second
- Battery Charger
- Charging algorithm : 2 Stage Charger – Bulk & Float
- Float voltage : 13.8V ± 0.3V
- Bulk charge/max. charging current : 15A
- Maximum ac input current : < 5A
- AC input power factor : 0.6
- Voltage & current rating of Fuse/Breaker : 125V/250V, 5A
- Charger on/off control : By front panel Switch
- Protections
- Overload shutdown : Yes. Manual reset.
- Low battery input (voltage) alarm : 10.8 ± 0.3V
- Low battery (input) voltage shutdown : 10.5 ± 0.3V
- Battery (input) over voltage shutdown : > 15.5V
- Cooling – load controlled fan : Inverter Mode: ON at 85W
- Charging Mode: ON at charging current > 3A ± 1A
- Over temperature shutdown : Yes. Auto reset
- Ground fault shutdown : Yes. Manual Reset.
- DC input reverse polarity : Fuse 240A (8 pcs. 30A Automotive Type ATC Fuses in parallel)
- Connections
- DC input : Nut & Bolt, M9
- AC INPUT / AC OUTPUT : 6 foot cord with NEMA5-15P Plug / 2 x NEMA5-15R Outlets
- General
- LED display GREEN “Inverter”; GREEN “Charger”; RED “Fault”; YELLOW “Input Fault”
- Operating Temperature Range (MIN. TO MAX.) 0°C to 25°C / 32°F to 77°F at 100% loading;
- 26°C to 35°C / 78.8°F to 95°F at 80% loading
- Operating Humidity < 80%; Non-condensing
- Dimensions (W x D x H) 202 x 345 x 84 mm / 7.95 x 13.58 x 3.30 in
- Weight 4.0 kg / 8.82 lb
Reviews
There are no reviews yet.