Description

This is the SmartSolar MPPT 250/100-Tr VE.Can by Victron Energy. One of their exceptionsl line charge controllers that lets you do more with less. With a capacity of 250V on its input, you are free to series-string your solar panels for longer home runs from the array. At 100A, you have room to build your system as you need. And with Bluetooth set-up and monitoring via your smartphone built-in, you’ll always know the status of your system.

SmartSolar MPPT 250/100 Key Features

• Ultra-fast Maximum Power Point Tracking (MPPT)
• Advanced Maximum Power Point Detection in case of partial shading conditions
• Outstanding conversion efficiency with no fan cooling exceeding %98
• Fully programmable charge algorithm with eight pre-programmed algorithms, selectable with a rotary switch
• Extensive electronic protection
• Internal temperature sensor
• Real-time data display using VictronConnect application.
• 3 Charging stages: Bulk – Absorption – Float
• Works with all Lithium battery & lead-acid battery types
• Supports 12V, 24V, 36V, and 48V battery banks

The Victron SmartSolar Charge Controller has an ultra-fast Maximum power point tracking (MPPT) controller that improves the energy harvest by 30% compared to PWM controllers and by up to 10% compared to the slower MPPT controllers. Especially in the clouded sky when the light intensity is changing continuously.

The Victron SmartSolar Charge Controller uses the advanced Maximum Power Point Detection in cases of partial shading conditions. at times of partial shading happens two or more maximum power points can be presented on the power-voltage curve. Conventional MPPTs tend to lock to a local Maximum Power Point (MPP), which may not be optimum; however, the innovative SmartSolar algorithm will always maximize the energy harvest by locking to the optimum MPP.

This Victron SmartSolar charge controller comes with the remote management possibility using your smartphone or other Bluetooth-enabled devices. This feature can be used to control, monitor, and update the system wirelessly in the comfort of your home using the VictronConnect application. You also be connected directly to a Color Control GX, computer, or other devices.

The SmartSolar charger is equipped with an internal temperature sensor to compensate for the charging voltage according to its temperature. If the system temperature rises, the controller’s Extensive electronic protection will automatically reduce its output current (temperature >40°C). In addition to the mentioned protection systems, also this system is equipped with safety devices against overheating, short circuits, polarity reversal, and module current reversal.

SmartSolar MPPT 250/100 Specs in Brief

Battery voltage: 12 / 24 / 48V
Auto Select (36V: manual)
Rated charge current : 100A
Nominal PV power, 12V : 1450W
Nominal PV power, 24V : 2900W
Nominal PV power, 36V : 4350W
Nominal PV power, 48V : 5800W

Maximum PV open circuit voltage : 250V (absolute maximum coldest conditions)
245V start-up and operating maximum
Maximum efficiency : 99%
Self-consumption : Less than 35mA @ 12V / 20mA @ 48V

Download the full spec sheet here