Making solar streamlined and fun.
Tamarack’s mission is to honor and sustain the earth by providing fantastic solar PV mounting solutions through communicative, kind, engaged and humor filled relationships.

The world is on the brink. Life is stressful. Change is hard. Tamarack wants to make the (electrical ) load easier to bear. We are committed to making solar achievable by making it accessible, affordable, amusing, and easy to install.

Tamarack Solar Products was founded in Willits, California in the mid-1990’s as Two Seas Metalwork to manufacture mounting systems for solar modules. At the time, northern California was the epicenter of the residential solar industry, and solar arrays were primarily being installed on hand-built structures. Tamarack’s first products allowed solar panels to be secured to a steel pole that could be placed anywhere.

Tamarack Pole/Wall Mount System

Mount panels to Poles and many other vertical surfaces.
Easy installation and infinite options with Tamarack’s full line of vertical-mount solar panel hardware

• Securely mount to a pole or wall
• Mount from 1 to 6 solar modules on a single pole
• Accommodate modules from 10 watts to 400+ watts (depending on module size/total square footage)
• Adjustable tilt angle allows for seasonal change to minimize snow loading and maximize energy production

Configuration Options…
Single Arm : Side of Pole
Horizontal Bucket : Side of Pole
Single Row – Portrait : Top of Pole
Landscape : Top of Pole

Adjustable Ground/Roof Mount

The Ground/Roof Mount can support installations in a wide range of locations. Quantities of panels supported vary by panel widths. Great for use in off-grid applications and on flat roof structures.

• Accommodates modules with rear mounting holes on frames
• Available in two rail lengths: 90-inches or 130-inches
• Mount 2-3 large modules with widths less than 43-inches
• Suitable for smaller modules – total width of modules + 1/2-inch spaces between each module must equal less than mounting rail length
• Telescoping back legs can be adjusted for tilt angle of 20 to 60-degrees from horizontal
• Single tool installation
• No need to source additional pipe, everything above the footing bolts is included
• Optional intertie kit allows for joining multiple mounts together to create a single array

Contact us to get a Tamarack quote and put your solar plans into action!